Flexural testing machines

Flexural testing machines for concrete, beams, slabs, precast products and construction materials.

Test type

Filtre type d’essai

Brands

Filtre marques
10
products
RP100BT

100-200 kN gantry-type Flexural Testing Machine

GANTRY-TYPE Flexural Testing Machine Characteristics: Double-acting cylinder, l...
100-200 kN gantry-type Flexural Testing Machine
RP5-T

5-12-30-50 kN gooseneck type flexural testing machine

Indeed, after machining, our gooseneck frames are then milled at the cylinder an...
5-12-30-50 kN gooseneck type flexural testing machine
Banc-dessais-n1

Flexural Bench with Mobile Gantries for hollow core slabs

Since 2000, we have also been called upon to produce numerous flexural benches w...
Flexural Bench with Mobile Gantries for hollow core slabs
RP30PL

Flexural Testing Machine for Beams

Designed for prestressed or reinforced concrete beam production plants, our Test...
Flexural Testing Machine for Beams
Machine d’Essais de Flexion pour tuyaux et regards

Flexural Testing Machine for pipes and manholes

All our testing machines for pipes benefit from a construction with self-support...
Flexural Testing Machine for pipes and manholes
RP5-PSE

Flexural Testing Machine for Polystyrene Infill Blocks

Designed in partnership with the polystyrene manufacturers' association, the RP5...
Flexural Testing Machine for Polystyrene Infill Blocks
RP50-ELMB-P

Gantry-Type Electromechanical Flexural Testing Machine 50 kN

Gantry-type wood testing machine with electromechanical actuator stroke 350 mm M...
Gantry-Type Electromechanical Flexural Testing Machine 50 kN
RP80

Gantry-type Flexural Testing Machine for Curbs and Prisms 80-110-150-200 kN

The gantry-type flexural testing frame is available in 4 different load capaciti...
Gantry-type Flexural Testing Machine for Curbs and Prisms 80-110-150-200 kN
banc-d-essai-cisaillement

Multi-actuator test bench

Machine adapted according to specifications Multi-point flexural tests orshear t...
Multi-actuator test bench
RP50-ELMB-C

Swan-neck type Electromechanical Flexural Testing Machine 50 kN

Swan-neck type wood testing machine with electromechanical actuator load contro...
Swan-neck type Electromechanical Flexural Testing Machine 50 kN

Measure the flexural strength of construction materials

Flexural testing machines are used to measure the mechanical strength of materials and products subjected to bending loads.

They are used in civil engineering laboratories to test concrete beams, slabs, kerbs, paving units, precast elements and specimens.

Configurations vary according to the dimensions of the products being tested, the required load capacity, the support fixtures and the required level of test control. Selection also depends on the applicable test standards and the frequency of use in the laboratory.